by WOWSlider.com v8.2
SMPS
480W SINGLE OUTPUT SMPS
FEATURES
- Overload/Short circuit protection
- Natural cooling
- Fixed switching frequency
- Low cost
SPECIFICATION |
||
| Input voltage | 230V+/-10% AC, 1 Phase, 50Hz | |
| Output Power | 480W | |
| DC output Voltage | 24V | 48V |
| Output Current | 20A | 10A |
| Voltage Adjustability | 21.5V to 26.5V | 43V to 52.8V |
| Regulation | 0.5% | 0.5% |
| Efficiency | >81% | >82% |
| Ripple | <50mV | <60mV |
| Overload/Short circuit | 110% hiccup mode with auto recovery | |
| Dielectric strength | 1.5KV/50Hz AC for 1 min. | |
| Dimension | 115 mm(W) x 300 mm (D) x 85 mm (H) | |
1350W Single Output Micro-controller Based SMPS With Active Power Factor Correction
- Wide input voltage
- Active Power Factor Correction
- Power factor better than 0.98
- Low input current harmonics
- Very high efficiency
- Natural cooling
- CV-CC operation
- Parallel Operation
- Remote operation & monitoring
- RS-485 serial remote operation
- Protection with indication: Overload/Short Circuit, Input voltage low & high, tripping with auto recovery, Output voltage low & high, tripping for voltage high with manual reset
SPECIFICATION |
|
| Input voltage | 150V to 275V AC, 1 Phase, 50Hz |
| Power Factor | 0.98 |
| Input current harmonics | 5% |
| DC Output | 54V* (Adj 48V to 55.2V) @Â 25A |
| Output Power | 1350W |
| Voltage regulation | +/- 1% |
| Efficiency | >90% |
| Ripple | 200mV |
| Overload/Short circuit | 105% |
| Dielectric strength | 1.5KV/50Hz AC for 1 min |
| EMC | Telecom standards |
| *Other voltages on specific request | |
5400W Single Output Micro-controller Based SMPS With Active Power Factor Correction
FEATURES
- Wide input voltage
- Active Power Factor Correction
- Power factor better than 0.98
- Low input current harmonics
- Very high efficiency
- Forced cooling
- CV-CC operation
- Parallel Operation
- Remote operation & monitoring
- RS-485 serial remote operation
- Protection with indication: Overload/Short Circuit, Input voltage
- low & high, tripping with auto recovery, Output voltage low & high, tripping for voltage high with manual reset Â
SPECIFICATION |
|
| Input voltage | 260V to 476V AC, 3 Phase, 50Hz |
| Power Factor | 0.98 |
| Input current harmonics | 5% |
| DC Output | 54V* (Adjustable 48V to 55.2V) @Â 100A |
| Output Power | 5400W |
| Voltage regulation | +/- 1% |
| Efficiency | >90% |
| Ripple | 200mV |
| Overload/Short circuit | 105% |
| Dielectric strength | 1.5KV/50Hz AC for 1 min. |
| EMC | Telecom standards |
| *Other voltages on specific request |
240W SINGLE OUTPUT SMPS
FEATURES
- Wide input voltage
- Overload/Short circuit protection
- Forced cooling
- Fixed switching frequency
- Low cost
SPECIFICATION |
|
| Input voltage | 175V to 264V AC, 1 Phase, 50Hz (OR) 228V to 370V DC |
| Output Power | 240W |
| Overload/Short circuit | 110% hiccup mode with auto recovery |
| Dielectric strength | 1.5KV/50Hz AC for 1 min. |
| EMC | Telecom standards |
| Dimension | 160 mm(W) x 150 mm (D) x 85 mm (H) |
240W Single Output SMPS
FEATURES
- Wide input voltage
- Overload/Short circuit protection
- Natural cooling
- Fixed switching frequency
- Low cost
SPECIFICATION
| Input voltage | 170V to 264V AC, 1 Phase, 50Hz |
| (OR) :Â Â Â 220V to 370V DC | |
| Output Power | 120W |
| Overload/Short circuit | 110% hiccup mode with auto recovery |
| Dielectric strength | 1.5KV/50Hz AC for 1 min. |
15W Multiple Output SMPS
FEATURES
- Universal AC input
- Overload/Short circuit protection
- Natural cooling
- Fixed switching frequency
- Three outputs
SPECIFICATION |
|
| Input voltage | 90V to 275V AC, 1 Phase, 50Hz (OR)120V to 388V DC |
| DC Output | +5V/1.5A, +12V/300mA, -12V/300mA |
| Output Power | 15W |
| Voltage regulation | +/- 2% |
| Efficiency | 80% |
| Ripple | < 10mV |
| Overload/Short circuit | 120% hiccup mode with auto recovery |
| Dielectric strength | 1.5KV/50Hz AC for 1 min. |
| EMC | Telecom standards |
DC Fast Charging Station
FEATURES
| Specification | |
| INPUT | |
| Voltage    | 415V AC, +10%, -15%, 3 phase, , 4-wire |
| Frequency | 45-65Hz |
| OUTPUT | |
| Voltage | 48V DC (40-68V) for 48V battery pack or72V DC (60-90V) for 72V battery pack, selectable through CAN |
| Current | 200A @ 68VDC or 130A @90VDC |
| Output Power | 13.6kW |
| Preset charge time in min | 15,30,45,60,75,90, F (selectable through Time Set pushbutton on the front panel ) |
| Regulation | 2% |
| Efficiency | 87% |
| Ambient | 50 deg C |
| Humidity | 95% RH, non-condensing |
| Cooling | Forced Air |
| Ingress Protection | IP-33 |